Physics
Seesaw arm
Seesaw arm
Seesaw arm support
Seesaw arm support
Semi circular Refraction Dish
Semi circular Refraction DishThis open prism can be used in optics experiments to identify the refractive index of different liquids, as the exit angle in relation to the plumb line for the light source can be read at the bottom of the prism.
Note The material is plastic and is therefore not resistant to alkaline or acidic liquids, and it is therefore recommended that the prism be cleaned after use.
Sensor-Based Diffraction System
Sensor-Based Diffraction SystemEnables students to scan many diffraction and interference patterns during one lab period.
Series/Parallel Springs
Series/Parallel SpringsCombine this set of six short springs with the Equal Length Spring Set (ME-8970) to observe spring behavior in series and in parallel.
Set of dynamometers in case, Frederiksen
Set of dynamometers in case, FrederiksenNine different precision dynamometers of types 103800 – 103880 with ranges 0.1-0.2-1-2-5-10-20-50-100 Newton. Supplied in a handy, foam-lined, partitioned case. Case size: 327 x 275 x 55 mm.
Shear Accessory
Shear AccessoryPerform shear test for a variety of wires with diameters of: 1/16″, 3/32″, 1/8″, and 5/32″.
Shear Samples
Shear SamplesSet of three each of 1/8″ diameter aluminum, brass, and mild steel samples.
Shoot-the-Target
Shoot-the-TargetThis photogate-triggered drop box has a unique electromagnet design for a quick release of the target.
Silicon tubing Ø 2/4 for Horizon set 1m
Silicon tubing Ø 2/4 for Horizon set 1m
Silver electrode
Silver electrodeSilver electrode for experiments concerning the oxidation potential of metals or building voltaic cells.
Sine Wave Generator
Sine Wave GeneratorThe Sine Wave Generator generates, controls, and stores the very same sine wave signals used by speakers and wave drivers.
Single dipper
Single dipper
Slide Carrier
Slide CarrierA simple acrylic carrier to hold standard slides 50 x 50 x 2mm such as Young’s slits
Product code: LA20-882
Sliding Friction Experiment
Sliding Friction ExperimentThe complete solution for discovering the frictional forces on a sliding object.
Slinky spiral spring – 10 m
Slinky spiral spring – 10 mUsed to demonstrate longitudinal fluctuations.
Slinky spring – 5 m
Slinky spring – 5 mThis iron spring is suitable for demonstrating wave oscillations.
Slotted weights with holder
Slotted weights with holderUsed for accelerating an air track cart. The set consists of a 2 g holder, 2 weights of 1 g, 1 weight of 2 g, 1 weight of 5 g, 1 weight of 10 g. Total weight: 21 g. The combined weight can thereby be varied from 2 g to 21 g in steps of 1 g.
Slotted weights with holder
Slotted weights with holderWear soldering iron with holder, in brass.
