This model shows the internal structure and operating principles of an air cooled two-stroke engine. All parts are aluminum and plastic. Ignition is shown via a small bulb. Carburetor and fuel supply are also sectioned. Hand crank is provided for manual operation. Mounted on a base.
Allows mounting and changing of distance between field coils and is used for studies in electromagnetism.
Replacement torsion bands for the Gravitational Torsion Balance (AP-8215A).
When plugged into a detector coil, the LED flashes red or green as the detector coil passes through the magnet to indicate which direction the current flows through the detector coil.
Designed to measure both pulling and pushing forces allowing labs from cart collisions to tug-of-war.
Designed to measure magnetic field with three selectable ranges of +-1000 gauss.
Combines features that significantly improve the ease of setup, the durability of the Torsion Band and the quality of results. In the newer models the spheres are tungsten rather than lead.
A 2000 turn wire coil on one end of a wand that has two terminals at the other end to accommodate banana plug contacts, permitting easy connection of an electric circuit.
Allows a rotary motion sensor to mount on a Dynamics Track and act as a high resolution bi-directional Smart Pulley.
Slides through a special slot in the Rotary Motion Sensor and allows you to measure short linear distances.
An extra 3-step Pulley for PASCO’s Rotary Motion Sensors.
