Consists of a plexiglas tube with a piezoelectric igniter (appearance may vary) fitted in a rubber stopper.
The inside of the tube is moistened with a small amount of gasoline, and the supplied cork is inserted.
When the igniter is operated, the explosive air mixture is ignited and the cork is fired.
Dimensions: Ø 52 x 710 mm
Determines the current through the sensor by measuring the voltage across the internal resistor.
A 2000 turn wire coil on one end of a wand that has two terminals at the other end to accommodate banana plug contacts, permitting easy connection of an electric circuit.
Allows students to conduct experiments to measure the speed of light. Reflect a laser off a movable mirror into a light receiver to measure phase differences.
Designed to measure both pulling and pushing forces allowing labs from cart collisions to tug-of-war.
PASCO’s Light Sensor is ideal for indoor and outdoor relative light intensity experiments.
Replacement Spheres and collars for the Gravitational Torsion Balance (AP-8215A). Designed to convert to Tungsten while maintaining the proper large sphere dimensions.
Designed to measure magnetic field with three selectable ranges of +-1000 gauss.
Combines features that significantly improve the ease of setup, the durability of the Torsion Band and the quality of results. In the newer models the spheres are tungsten rather than lead.
The Stress Strain Apparatus lets students observe stress and strain as they stretch a material to the point of fracture.
Designed for experiments involving low light level conditions. ScienceWorkshop version.
